Hotpoint HR 636 A Bedienungsanleitung PDF herunterladen (Seite 5)

CONTROL PANEL

DAILY USE

SWITCHING THE HOB ON/OFF

To switch the hob on, touch the control until the cooking zone displays

light up.

To switch o, touch the same control until the displays switch o. All the

cooking zones are deactivated.

If within 30 seconds of switching on, no function is selected, the hob

switches o automatically.

SWITCHING ON AND ADJUSTING COOKING ZONES

Place the pot on the cooking zone, switching the hob on, activate the required

cooking zone by touching the corresponding “−” or “+” controls: “5” will appear

on the display. With “−” and “+” controls it is possible to select the required

power level, from min. 0 to max. 9.

DEACTIVATION OF COOKING ZONES

To switch o the cooking zone, touch simultaneously the control “

−

”

and “+” or select the level “0” with the control “

−

”.

The cooking zone switches o and, if still hot, the letter “H” appears on

the zone display.

KEY LOCK

This function locks the controls to prevent accidental activation of the

hob. To activate the control panel lock, touch control; an acoustic

signal sounds and a luminous indicator appears on the display. The

control panel is locked except for the switching o function.

To deactivate the control panel lock, repeat the activation procedure.

The presence of water, liquid spilled from pots or any objects resting on

the controls can accidentally activate or deactivate the control panel lock.

TIMER

The timer can be used to set the cooking time for a maximum of 99

minutes (1 hour and 39 minutes) for all the cooking zones.

Select the cooking zone to be used, touch the timer “–” or “+” controls;

an acoustic signal indicates the function activation. The display shows

“00”. The Timer value can be decreased and increased by keeping the

nger on the controls “+” or “–”. After the Timer value selection, the

display continue to blink for 10 seconds before the countdown starts.

When the set time has elapsed, an acoustic signal sounds and the

cooking zone switches o automatically.

To deactivate the timer, select the cooking zone, touch the Timer

controls “–” and “+” simultaneously.

Power indicator display

Selected cooking zone indication

(the dot blinks when there is a Timer active on that zone)

IMPORTANT:

• The dot blinking next to the power level display shows that the

Timer function is active on that zone.

• The Timer is available for all the zones but one at a time.

RESIDUAL HEAT INDICATOR

If the display shows , the cooking zone is still hot. If the residual

heat indicator of a given cooking zone is lit, that zone can be used, for

example, to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes o.

IMPORTANT: To avoid a permanent damage the hob:

• do not use pots with bottoms that are not at;

• do not use metal pots with enamelled bottom;

• do not place hot pots/pans over the control panel.

SPECIAL FUNCTION

BUTTON FUNCTION

NAME

VISUAL

INDICATION

DESCRIPTION

Dual/Triple

zone

The control activates the double or triple

zone (if available). After positioning the

pot/accessory on the chosen cooking zone,

switch on the hob and select the cooking

zone. Select the power level and touch the

control one time to activate the dual zone

or two times to activate the triple zone.

To deactivate the function, simply touch

the same button. LEDs above the controls

are switched on only when the function is

active for the selected zone.

Boiling

Display shows:

This function sets the zone maximum power

(for example to quickly bring water to the

boil). After positioning the pot/accessory

on the chosen cooking zone, switch on the

hob, select the cooking zone and touch the

boiling controls. After 10 minutes of usage

of this function, the appliance automatically

sets the zone to level 9. To deactivate the

function simply touch the same control or

lower the power level with "

–

". It is possible

to use this function in combination with

dual/triple zone function.

Melting

Display shows:

This function sets a power level that

is suitable for slowly melting delicate

products without compromising their

sensory quality (chocolate, butter, etc.).

After positioning the pot/accessory on the

chosen cooking zone, switch on the hob,

select the cooking zone and touch the

melting control. To deactivate the function,

simply press the same button or touch "

–

and "+" to switch o the zone. It is possible

to use this function in combination with

dual/triple zone function.

FIRST TIME USE

After connecting the hob to the electrical power supply, the control panel

is locked. To unlock the control panel, touch the control for 2 seconds.

The control panel lock indicator switches o and the hob can be used.

Read the “Control panel lock” paragraph for more details.

imer controls

and display

Zone controls and display

On/O MeltingBoilingControl panel lock

Dual/Triple

zone

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Hotpoint HR 636 A Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Hotpoint HR 636 A