Hotpoint TDC 75 Bedienungsanleitung PDF herunterladen (Seite 3)

ELECTRICAL CONNECTION

For your safety please read the following information

Warning: This appliance must be earthed.

The appliance must be connected to a 220-240 volts 50 cycle AC

supply by means of a three pin socket, suitably earthed and should be

protected by a 13 amp fuse in the plug or a15 amp fuse in the

consumer unit.

The appliance is supplied with a moulded 13 amp 3 pin mains plug

fitted with a 13 amp fuse. Should the fuse require replacement, it

must be replaced with a fuse rated at 13 amp and approved to

BS1362.

The plug contains a removable fuse cover that must be refitted when

the fuse is replaced. In the event of the fuse cover being lost or

damaged, the plug must not be used until a replacement cover has

been obtained.

If the moulded mains plug is unsuitable for the socket outlet in your

home or is removed for any other reason, then the fuse should be

removed and the cut off plug disposed of safely to prevent the hazard

of electric shock.

There is a danger of electric shock if the cut off plug is inserted into

any 13 amp socket outlet.

How to wire a 13 amp plug.

Important

The wires in the mains lead on this appliance are coloured in

accordance with the following code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

As the colours may not correspond with the markings identifying

the terminals in your plug proceed as follows.

The green and yellow wire must be connected to the terminal in the

plug which is marked with the letter E or with the earth symbol or

coloured green and yellow.

The blue wire must be connected to the terminal marked N or

coloured black.

The brown wire must be connected to the terminal marked L or

coloured red.

1 2 3 4 5 6 7 8

Keine Kommentare

Hotpoint TDC 75 Bedienungsanleitung Seite 3