Hotpoint HSWP1000MWW Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 6)

Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips

FAQ

Q: What is the difference between Heavy and Light settings?

A: For Whites and Colors, the wash agitation time is increased by 6 minutes and for Permanent Press, by 12 minutes. (Times are

approximate)

Q: What is the difference between Regular and Pulsed?

A: Regular means the washer will continuously agitate during the wash cycle. Pulsed provides a more gentle wash cycle by

including pause periods during the wash cycle.

Q: Which cycle is best for heavily soiled items?

A: Whites or Colors cycles have the greatest wash intensity. This cycle provides the best overall cleaning. Permanent Press

should be used for wrinkle-free and permanent press items.

Q: How can I reduce linting?

A: Sort wash loads by fabric type and whether they collect lint (velveteen, corduroy) or produce lint (terry cloth, chenille). Wash

small loads for a shorter amount of time.

Q: How much detergent do I use?

A: For best performance, always follow the detergent manufacturer’s instructions on usage. Many detergents are concentrated,

so consult the product label and follow the clearly marked lines on the detergent measuring cups. Excessive detergent can

negatively impact the wash performance.

Q: How does the selection of Power Rinse or Fabric Softener affect water usage of my washer?

A: Selecting the Power Rinse or Fabric Softener feature will increase the amount of water used by your washer during the rinse

cycle. The added water assists in the proper dilution of fabric softener. The quantity of water used in this cycle is comparable

to the amount used in the initial fill.

About the washer features

Separate for cleaning

Cleaning the Fabric Softener Dispenser (on some models)

Remove the dispenser from the top of the agitator.

Separate the dispenser cup from the cover by grasping the top and pushing down on the

inside of the cup with your fingers. Dispenser cup will pop free from the cover.

To clean the dispenser, soak both the dispenser cup and the dispenser cover in the

following solution:

  1 US gallon (3.8 liters) warm water

  1/4 cup (60 ml) heavy-duty liquid detergent

  1 cup (240 ml) bleach

If necessary, loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush;

you may roughen the surface of the dispenser.

Rinse and reassemble dispenser. Place dispenser back on the agitator.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Keine Kommentare

Hotpoint HSWP1000MWW Gebrauchs- und Pflegehandbuch Seite 6