Hotpoint SMO 604OF/NE Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 6)

Use & Care guide

SWITCHING THE HOB ON/OFF

To turn the hob on, press the power button for around 1

second, until the cooking zone display lights up. To turn the

hob o, press the same button again, and all cooking zones

will be deactivated. If no function is selected, the hob will

automatically switch o after 10 seconds. If the hob is being

used, switching it o will switch o all cooking zones, and

the residual heat indicator, “H”, will remain lit until all of the

cooking zones have cooled.

POSITIONING

1. Locate the desired cooking zone, by referring to the

position symbols at the bottom of each slide touchscreen.

2. Place the pan in the chosen area, making sure that it covers

one or more of the reference marks on the surface of the

hob.

3. Do not cover the control panel symbols with the cooking

pot.

ACTIVATING/DEACTIVATING COOKING ZONES AND

ADJUSTING POWER LEVELS

OFF

MaxMin Med

To switch on a cooking zone:

1. Switch on the hob.

2. Set the required power level by sliding your nger across

the slider control (SLIDER) for the cooking zone of choice.

The power level will appear above the slider. Each cooking

zone has dierent power levels, ranging from “1” (minimum)

to “18” (maximum).Using the slider controls it is also possible

to select the quick heat

function, which is marked “P” on the

display.

To switch o the cooking zones:

Use the “OFF” control at the start of the slider control. If the

cooking zone is still hot, the residual heat indicator “H” will

appear on the display.

CONTROL PANEL LOCK

To prevent the hob from being switched on accidentally,

press and hold down the OK/Control Lock-3sec control for 3

seconds. An acoustic signal and a light above the symbol will

switch on to indicate that the lock is in place. The control panel

is locked except for the switch o function. To switch o the

control lock, repeat the activation process. The light will switch

o and the hob controls are again active.

PAUSE

The Pause function interrupts hob operation for about 30

seconds. During this time, it is possible to clean the surface

around the controls without altering any presets. After this

time, the hob will go back to operating as normal.

SETTINGS

POWER CONTROL

With the “Power control” function, you can set the maximum

power level for the hob, based on your needs or on the

capacity of your mains power supply.

Once the maximum power has been set, the hob automatically

adjusts the charge distribution to the dierent cooking zones

and an acoustic signal will sound when the limit is reached.

This setting can be used at any time and will remain until it is

changed.

At the time of purchase, the hob is set to the maximum

possible power (nL). The maximum power level (nL) is printed

on the identication plate on the bottom of the hob.

To set the hob power:

Once the appliance is connected to the mains power, the

power level can be set within 60 seconds.

• Press and hold down the control for 3seconds.

• The display will read .

• Hold down the control until the last power setting is

shown.

• Use the and controls to select the required power.

• Available power settings are: 2.5kW - 4.0kW - 6.0kW – nL

(no limit).

• Press to conrm.

The selected power will remain in the memory, even in the

case of a power outage.

To vary power levels, disconnect the appliance from the mains

power for at least 60seconds, then reconnect it and repeat the

steps above.

In case of error during the setting sequence, the display will

show the symbol and an acoustic signal will be sounded. In

this case, you will need to repeat the operation.

If the error persists, contact the assistance service.

ACOUSTIC SIGNAL ON / OFF

To switch the acoustic signal on/o:

• Switch on the cook top

• Hold down the

control on the rst slider to the left, for

3seconds.

Any alarms set will remain active.

3”

OFF

Max

MinMed

OFF

Max

MinMed

OFF

Max

MinMed

OFF

Max

MinMed

DAILY USE

HOW TO USE THE APPLIANCE

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Hotpoint SMO 604OF/NE Gebrauchs- und Pflegeanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Hotpoint SMO 604OF/NE